2001 ford focus radio fuse




Article Navigation:
  • Photo
  • Ford Taurus Ses Fuse Box Diagram - Simple Wiring Diagram
  • Video
  • RELATED PAGES
  • where is the radio fuse location in ford focus - Ford Focus question.

    The Focus is a small, front-wheel drive car that was introduced by Ford Motor Co. as Replace a blown fuse to get your Focus radio up and working again.

    FACT! Throughout its history, the logo of the company has changed 8 times, but the name Ford has never disappeared from the emblem.

    Hi! There are two fuses for the radio in your car. The fuses are in the central fuse block, which is located under the driver's side of the dash.

    Turn off the ignition key and the radio. It's worth a thousand words. Other videos you might find helpful. Behind that you'll see the fuses.

    Interior Fuse Box Location: Ford Focus - Ford Focus SE L 4 Cyl. Sedan

    The Focus is a small, front-wheel drive car that was introduced by Ford Motor Co. Few changes were made in the first few production years, so the Focus is pretty much the same car as the original.

    Regardless of the factory radio installed, the fuse that powers the radio unit's electrical circuit is located in the passenger compartment fuse panel. Turn off the ignition key and the radio.

    Locate the fuse panel access cover on the lower part of the dashboard, under the steering wheel and above the brake pedal. Grasp the cover from the bottom and pull it straight out from the dashboard to release the retaining clips, then slide it downwards slightly. Remove the cover and place it aside. Note that the radio fuse is inserted into position 41 on the fuse panel -- this is the first fuse on the left of the second row, as you look up from the bottom of the fuse panel after removing the access cover.

    Squeeze the handles of a fuse puller together to open the jaws of the tool slightly. Push the jaws over the radio fuse and release the handles. Squeeze the jaws of the tool together so that the small tabs of the puller grab the upper plastic part of the fuse. Slide the tool straight out of the fuse panel, which will bring the fuse out with it.

    Slide the upper tab of the fuse panel access cover into the slot on the upper side of the dashboard fuse panel opening. Push the lower part of the panel towards the dashboard until the retaining clips on each side of the panel engage with the slots on the sides of the opening.

    This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about It Still Runs, contact us. Tip A non-working radio may be caused by a blown fuse.

    Check to see if the fuse is blown by first removing it. Observe the metal wire encased in the plastic upper part of the fuse. The fuse is still good if the metal wire is still intact. The problem may then have to do with the radio wiring or with the radio itself.

    Items you will need Fuse puller available at auto parts stores 7. About the Author This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.

    Replacing Fuses In My 2000 Ford Focus - Let's Talk



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲