Volvo 240 trailing arm bushing tool




Volvo 240 trailing arm bushing tool

Article Navigation:
  • Photo
  • Homebrew Volvo Trailing Arm Bushing Tool
  • Video
  • RELATED PAGES
  • Volvo Trailing Arm Bushing tool. I put this page together to detail the steps required to replace the big trailing arm bushings on the Volvo I made the tool up.

    the art of trailing arm bushing replacement on a rusty brick the internet says you can change your Volvo trailing arm bushings in an afternoon. I built my own removal tool courtesy of Neal Wilcer's web page.

    Find great deals on eBay for Trailing Arm Bushing Tool in Other Automotive Hand Tools. BMW RTAB Tool E46 E36 Z4 Rear trailing arm bushing M3 i i Gold Color . FOR VOLVO S40 V50 REAR SUSPENSION TRAILING ARM BUSH .

    Volvo 240 trailing arm bushing tool

    Volvo 240 trailing arm bushing tool

    Tried heat, PBBlaster, nothing. Find More Posts by vvpete. Use the hand file on the top of the end cap to file a flat surface. Thread Tools Show Printable Version.

    Volvo 240 trailing arm bushing tool

    Volvo 240 trailing arm bushing tool

    Volvo 240 trailing arm bushing tool

    Volvo 240 trailing arm bushing tool

    Volvo 240 trailing arm bushing tool

    Trailing arm bushing tool - Turbobricks Forums

    You know how those recipes in the paper say they will take 20 minutes? They usually take me at least And you know how every piece of information you can read on the internet says you can change your Volvo trailing arm bushings in an afternoon.

    And not if you are me. The tool worked as well as could be expected and was fun to build. But let me cut to the chase. If your car is rusty, here is my recommendation for removal of your trailing arm bushings: Jack the rear of your car up by the pumpkin. Place a jack stand under the rear jacking points. Remove the bottom bolt of your shock 4.

    Volvo 240 trailing arm bushing tool

    Remove the trailing arm nut from the cross brace. Remove the trailing arm bushing bolt. If this bolt gives you a hard time, chisel it off and get a new nut. Remove the nut that holds the bottom of the spring on the trailing arm. Drop the trailing arm down and out of the way. Take your sawzall and install a new blade. Cut the trailing arm bushing from top to bottom clear through on either end near the trailing arm rails.

    Take a hammer and a chisel and knock what little is left of the bushing out of the holes. Now you can install the new bushings. The tool comes in handy for this step. Make sure up is up and the tapered end is started on the inside mount. Try not to break your rear brake guards when you are pounding on the trailing arm to get the bushing holes top line up. Otherwise you will get it stuck in the bushing holder hole when inserting the new bushings. You should be done with both bushings in an afternoon.

    Volvo 240 trailing arm bushing tool

    The official Volvo site can be found here. ALL SV90 Mon May 20 Time is NOT on my side It might help some to liberally oil the threads of the bolt. Cut and paste link: All participants agree to these terms. Powered by Denizen - Custom Software for volvo Enthusiasts.

    Volvo 240 trailing arm bushing tool

    Homemade Control Arm & Trailing Arm Bushing Press Tool



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲